Utilization of adzuki bean extract as a natural antioxidant in cured and uncured cooked pork sausages

A commercial adzuki bean extract (AE) was evaluated for antioxidant effectiveness in cured and uncured cooked pork sausages. TBARS values, instrumental color evaluation and sensory panel scores were assessed. For uncured sausages, AE at 0.2% was equally effective as 0.1% butylated hydroxytoluene (BHT) in reducing TBARS values. Similarly, AE at 0.2% significantly (P<0.01) reduced the TBARS in cured sausages. Incorporation of 0.2% AE into sausages produced higher (P<0.05) CIE lab color a* value and lower (P<0.05) L* and b* values. Sensory panels did not detect any difference in color, odor, taste, flavor, and overall acceptance in uncured pork sausages with addition of 0.2% AE. However, there were adverse changes in the color and odor of cured sausages, even though the taste, flavor, and overall acceptance were similar. Therefore, the results suggest that AE is a potential antioxidant.     

Synthesis and Field Tests of Possible Minor Components of the Sex Pheromone of Prionus californicus

Earlier work has shown that adult male Prionus californicus Motschulsky (Coleoptera: Cerambycidae) are attracted to the female-produced compound (3R,5S)-3,5-dimethyldodecanoic acid, and to a synthetic mixture of the four stereoisomers of 3,5-dimethyldodecanoic acid. Here, we report the results of field trials that tested whether or not three structurally related compounds (methyl 3,5-dimethyldodecanoate, 3,5-dimethyltridecanoic acid, and 3,5-dimethylpentadecanoic acid), present in extracts of virgin females, are attractive, and whether or not they influence attraction to 3,5-dimethyldodecanoic acid. In a trial with single components, only traps baited with the acid or its methyl ester captured more beetles than did control traps; catches to the acid were five times higher than to the methyl ester. Another trial, excluding 3,5-dimethyldodecanoic acid, confirmed the activity of the methyl ester. Finally, addition of the three compounds to 3,5-dimethyldodecanoic acid, in the ratio found in extracts from female beetles, gave a catch similar to that of traps baited with 3,5-dimethyldodecanoic acid alone. Consequently, the function of these minor compounds remains undetermined.     

Development of confocal laser microscope system for examination of microscopic characteristics of radiophotoluminescence glass dosemeters

A confocal laser microscope system was developed for the measurement of radiophotoluminescence (RPL) photons emitted from a minute alpha-ray-irradiated area in an RPL glass dosemeter. The system was composed mainly of an inverted-type microscope, an ultraviolet laser, an XY movable stage and photon-counting circuits. The photon-counting circuits were effective in the reduction of the background noise level in the measurement of RPL photons. The performance of this microscope system was examined by the observation of standard RPL glass samples irradiated using (241)Am alpha rays. The spatial resolution of this system was ～ 3 μm, and with regard to the sensitivity of this system, a hit of more than four to five alpha rays in unit area produced enough amount of RPL photons to construct the image.     

Seasonal changes of arsenic speciation in lake waters in relation to eutrophication

In this study, the influence of eutrophication on arsenic speciation in lake waters was investigated. Surface water samples (n = 1-10) were collected from 18 lakes in Japan during July 2007 and February 2008. The lakes were classified into mesotrophic (7 lakes) and eutrophic (11 lakes) based on the total phosphate (T-P) and chlorophyll-a (Chl-a) concentrations in water column. Inorganic, methylated and ultraviolet-labile fractions of arsenic species were determined by combining hydride generation atomic absorption spectrometry with ultraviolet irradiation. Organoarsenicals (mainly methylated and ultraviolet-labile fractions) comprised 30-60% of the total arsenic in most lakes during summer. On the other hand, inorganic arsenic species (As(III + V)) dominates (about 60-85%) during winter. The occurrence of ultraviolet-labile fractions of arsenic was higher in eutrophic lakes than those in mesotrophic lakes in both seasons. The concentration of dimethyl arsenic (DMAA) was high in eutrophic lakes during winter; and in mesotrophic lakes during summer. The results suggest that the conversion of As(III + V) to more complicated organoarsenicals occurred frequently in eutrophic lakes compared to that in mesotrophic lakes, which is thought to be the influence of biological activity in the water column. The distribution of arsenic species were well correlated with phosphate concentrations than those of Chl-a. This might be due to the competitive uptake of As(V) and phosphate by phytoplankton. The organoarsenicals (OrgAs)/As(V) ratio was higher at low phosphate concentration indicating that conversion of As(V) to OrgAs species was more active in phosphate-exhausted lakes with high phytoplankton density.     

Multiresidue determination of quinolones in animal and fishery products by HPLC

A simple and rapid multiresidue method was developed for the determination of twelve quinolones (ciprofloxacin, danofloxacin, difloxacin, enrofloxacin, flumequine, marbofloxacin, nalidixic acid, norfloxacin, ofloxacin, orbifloxacin, oxolinic acid and sarafloxacin) in muscle, liver, chicken eggs, milk, prawn and rainbow trout.The quinolones were extracted from a sample with acetonitrile-water (95 : 5). A fifth part of the filtered extract was diluted with water to keep the acetonitrile ratio at ca. 60%, and passed through a C18 mini-column. The eluate was evaporated to dryness, and the residues were dissolved in methanol-water (30 : 70) for HPLC analysis.The quinolones were separated on a Inertsil ODS-3V column (4.6 mm i.d.x250 mm) with a gradient system of 0.1% phosphoric acid-acetonitrile as the mobile phase, with fluorescence detection.No interfering peak was found on the chromatograms of animal and fishery products, except for milk. The recoveries of the quinolones were over 60% from the animal and fishery products fortified at 0.1 microg/g, and the quantification limits of the quinolones were 0.005 microg/g. This proposed method was found to be effective and suitable for the screening of the quinolones in animal and fishery products.     

Prediction of a New Ligand-Binding Site for Type 2 Motif based on the Crystal Structure of ALG-2 by Dry and Wet Approaches

ALG-2 is a penta-EF-hand Ca(2+)-binding protein and interacts with a variety of intracellular proteins. Two types of ALG-2-binding motifs have been determined: type 1, PXYPXnYP (X, variable; n = 4), in ALIX and PLSCR3; type 2, PXPGF, in Sec31A and PLSCR3. The previously solved X-ray crystal structure of the complex between ALG-2 and an ALIX peptide containing type 1 motif showed that the peptide binds to Pocket 1 and Pocket 2. Co-crystallization of ALG-2 and type 2 motif-containing peptides has not been successful. To gain insights into the molecular basis of type 2 motif recognition, we searched for a new hydrophobic cavity by computational algorithms using MetaPocket 2.0 based on 3D structures of ALG-2. The predicted hydrophobic pocket designated Pocket 3 fits with N-acetyl-ProAlaProGlyPhe-amide, a virtual penta-peptide derived from one of the two types of ALG-2-binding sites in PLSCR3 (type 2 motif), using the molecular docking software AutoDock Vina. We investigated effects of amino acid substitutions of the predicted binding sites on binding abilities by pulldown assays using glutathione-S-transferase -fused ALG-2 of wild-type and mutant proteins and lysates of cells expressing green fluorescent protein -fused PLSCR3 of wild-type and mutants. Substitution of either L52 with Ala or F148 with Ser of ALG-2 caused loss of binding abilities to PLSCR3 lacking type 1 motif but retained those to PLSCR3 lacking type 2 motif, strongly supporting the hypothesis that Pocket 3 is the binding site for type 2 motif.     

Poly(N‐isopropylacrylamide‐co‐hydroxyethyl methacrylate) graft copolymers and their application as carriers for drug delivery system

Poly(N‐isopropylacrylamide‐co‐hydroxyethyl methacrylate) [P(NIPAM‐co‐HEMA)] copolymer was synthesized by controlled radical polymerization from respective N‐isopropylacrylamide (NIPAM) and hydroxyethyl methacrylate (HEMA) monomers with a predetermined ratio. To prepare the thermosensitive and biodegradable nanoparticles, new thermosensitive graft copolymer, poly(L ‐lactide)‐graft‐poly(N‐isoporylacrylamide‐co‐hydroxyethyl methacrylate) [PLLA‐g‐P(NIPAM‐co‐HEMA)], with the lower critical solution temperature (LCST) near the normal body temperature, was synthesized by ring opening polymerization of L ‐lactide in the presence of P(NIPAM‐co‐HEMA). The amphiphilic property of the graft copolymers was formed by the grafting of the PLLA hydrophobic chains onto the PNIPAM based hydrophilic backbone. Therefore, the graft copolymers can self‐assemble into uniformly spherical micelles ò about 150–240 nm in diameter as observed by the field emission scanning electron microscope and dynamic light scattering. Dexamethasone can be loaded into these nanostructures during dialysis with a relative high loading capacity and its in vitro release depends on temperature. Above the LCST, most of the drugs were released from the drug‐loaded micelles, whereas a large amount of drugs still remains in the micelles after 48 h below the LCST. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Engineering characteristics of a glacio-lacustrine clay deposit in a semi-arid climate

Parent material composition, particle disintegration by glaciers and lacustrine environment govern the geological development and engineering characteristics of clay deposits in southern Saskatchewan. The pre-existing expansive clay minerals were preserved due to the restrained leaching in the Regina Lake and the prevalent aridity in the area. The main objective of this paper was to develop a fundamental understanding of the clay deposit for the use in the design and construction of civil infrastructure. The results indicated the presence of expansive clay minerals in the deposit, with smectite accounting for 35% of the material. The major exchangeable cation was found to be Ca²⁺ which accounted for more than half of the total measured cation exchange capacity of 40 (cmol(+)/kg). The most likely exchange complex governing water adsorption of the clay was determined to be Ca²⁺-smectite. Alongside a high initial saturation (86%), this complex resulted in moderate volume changes in the clay. The swelling pressure was fully developed within the first hour of the constant volume test. The corrected swelling pressure was determined to be 120 kPa leading to an estimated heave of 36 mm in the surface layer of the deposit. The compression index and the swelling index were found to be 0.25 and 0.08, respectively.     

Thermal Conductivity of Bi<Subscript>0.5</Subscript>Sb<Subscript>1.5</Subscript>Te<Subscript>3</Subscript> Affected by Grain Size and Pores

A fine measurement system for measuring thermal conductivity was constructed. An accuracy of 1% was determined for the reference quartz with a value of 1.411 W/m K. Bi_0.5Sb_1.5Te₃ samples were prepared by mechanical alloying followed by hot-pressing. Grain sizes were varied in the range from 1 μm to 10 μm by controlling the sintering temperature in the temperature range from 623 K to 773 K. The thermal conductivity was 0.89 W/m K for the sample sintered at 623 K, while a grain size of 1.75 μm was measured by optical microscopy and scanning electron microscopy. The thermal conductivity increased on the sample sintered at 673 K because of grain growth and decreased on those sintered at the temperatures from 673 K to 773 K because the increase of pore size caused to decrease thermal conductivity. The increase of thermal conductivity for the samples sintered at temperatures above 773 K was affected by the increase of carrier concentration.     

Nanoimprinting using release-agent-coated resins

A fluorinated self-assembled monolayer (F-SAM) is mainly used as the antisticking layer. To prevent the F-SAM coated on the nanoimprint lithography (NIL) mold from deteriorating, we propose a new form of nanoimprinting using a release-agent-coated resin. The results from measuring the surface free energy and observations by scanning probe microscopy (SPM) confirmed that the surface free energy, frictional force, and adhesion force of the release-agent spray-coated polymethylmethacrylate (PMMA) were lower than those of PMMA. To prove the release-agent spray-coated PMMA had a releasing effect, we tried to undertake thermal nanoimprinting on it using a mold without F-SAM. The pattern was clearly imprinted on the resin without any signs of adhesion.